We have been manufacturing camshaft profile testers and camshafts for the last 15 years. We measure Base Circle , Lift , Runout, Profile, Velocity, acceleration, etc.
The machine has following features:
-
The computer controls rotation of the camshaft.
-
Camshafts between 1 and 120 inches (25-2500mm) can be measured. Camshafts weighing up to 275 lb.(125.0Kg) can be measured.
-
Cam lifts up to 2.36 inches (60mm) above the base circle can be measured.
-
Camshaft lobes (lobe lift + base circle radius) up to 4.000 inches (101.6mm) in radius can be measured. Camshaft objects (journals, gears, etc.) up to 4.000 inches (101.6mm) in radius can be turned
-
Will measure lifts accurately to within +/- 0.00025 inches (0.006mm). Will measure tip angles accurately to within +/- 0.05 degrees.
Services we offer:
-
Tailstock center replacement & repair.
-
Follower (flat/ball) replacement & repair.
-
DC servo motor replacement.
-
Control box replacement & repair.
-
Drive belt replacement.
-
IPC/software upgrade.
-
Machine upgrade.